Camera Labs

Hi All,
Well I shot my first wedding this past Saturday as the main photographer and all went well except for one thing. I had my uv filter on my lens and when we went to do some outside photos I attached my polarizing filter to the mix well I went to take the polarizing filter off it would not un-attach from the uv filter. So you all can see my predicament and I am wondering if there is anything I can do to rectify the situation. I thought I could possibly spray a little bit of WD-40 and let that soak in for a while to get them un-attached from each other. Any suggestions would be greatly appreciated.
Thank you
Gunner Out

I found this advice
Here http://www.cam-spares.com/page6.htm

Or you can buy a filter wrench that might help, Amazon have these
http://www.amazon.co.uk/s/?ie=UTF8&keyw ... 9f7i16oj_b

And B & H this
http://www.bhphotovideo.com/bnh/control ... ype=search

_________________
Nikon D90
Nikkor AF-S DX; 18-105 f/3.5-5.6G VR, 55-300 f/4.5-5.6G VR, 35mm f/1.8G
Speedlight SB-700

http://keystrokesukimages.com

The problem with the polarizing filters is that it's front end rotates freely and the palm method is not quite usable. A filter wrench is much better. If not thighten well such a filter may come loose after a while because it may unscrew itself a bit when rotating the front end, and finally fall. I've lost one that way

_________________
Radu
Canon PowerShot S100
Canon 50D , SIGMA 10-20 f3.5 ,Canon EF 24-105 L IS USM, Canon EF 100/2.8 macro Canon EF 50/1.4 ,Canon EF 85 f1.8,Canon EF-S17-85 4-5.6 Old Tamron 28-300 inherited from my Canon Rebel G film camera
Canon580EXII
http://www.errre.net